Description
Key
Features
Run time for load W
3m
Max. Capacity Used 100%
Output power capacity 1.05kWatts / 1.5kVA
Output Connections (4) Universal receptacle (Battery
Backup)
Nominal Output Voltage 230V
Nominal Input Voltage 230V
Input Connections IEC 60320 C14
APC Easy UPS SMV 1500VA, Universal
Outlet, 230V
Easy UPS provides power protection
for unstable power conditions, ensuring consistent and reliable connectivity at
the most critical moments.
Includes: Documentation
CD, USB cable, User manual
- Automatic Voltage Regulation (AVR)
Automatically
steps up low voltage and steps down high voltage to levels that are suitable
for your equipment.
- Cold-start capable
Provides
temporary battery power when the utility power is out.
- LCD graphics display
Text and
mimic diagrams that display modes of operation, system parameters and alarms.
- Pure sine wave output on battery
Simulates
utility power to provide the highest degree of compatibility for active PFC
(power factor corrected) servers and sensitive electronics.
Easy
UPS Features & Benefits
Manageability
Audible alarms
Provides notification of changing
utility power and UPS power conditions
LED Indicators
Provide easy-to-read status of the
unit and utility power conditions.
Features
Cold-start capable
Provides temporary battery power
when the utility power is out.
Sleek design
Slim, modern design can be upright,
flat, or wall-mounted to comfortably fit any electronics set-up and complement
home décor.
Boost Automatic Voltage Regulation
(AVR)
Preserves battery life and maximizes
runtime by correcting low voltages without discharging the battery.
Transformer-block spaced outlets
Protect equipment with input
transformer blocks without blocking access to other receptacles.
Safety
Safety-agency approved
Ensures the product has been tested
and approved to work safely with the connected service provider equipment and
within the specified environment.
Availability
Advanced Safety Features
Safeguard your Home UPS from
overloads, excessive mains voltages, short circuits, installation mishaps and
battery damage due to low voltage situations.
Battery failure notification
Provides early-warning fault
analysis on batteries enabling timely preventive maintenance
Intelligent battery management
Maximizes battery performance, life,
and reliability through intelligent, precision charging.
Protection
Battery and surge protected outlets
Back up and protect your hardware
and data during power outages, surges and spikes.
Battery backup and surge protection
Outlets provide abundant runtime for
network gateway equipment and other critical low-power devices, allowing for
hours of internet access during a power outage.
Output
Max Configurable Power (Watts) 1.05kWatts / 1.5kVA
Output Frequency (sync to mains) 50/60 Hz +/- 1 Hz Unsynchronised
Load Crest Factor 3 : 1
Topology Line interactive
Waveform type Sine wave
Transfer Time 2 ms typical
Input
Input frequency 45 – 65 Hz Auto-sensing
Input voltage range for main
operations 160 – 295V
Number of Power Cords 1
Other Input Voltages 220, 240
Batteries
& Runtime
Battery type Lead-acid battery
Typical recharge time 4hour(s)
Expected Battery Life (years) 3 – 5
Battery Charge Power (Watts) 54Watts
Battery Volt-Amp-Hour Capacity 216
Communications
& Management
Interface Port(s)
USB
Audible Alarm
Alarm when on battery : distinctive
low battery alarm : overload continuous tone alarm
Physical
Maximum Height 220MM, 22.0CM
Maximum Width 160MM, 16.0CM
Maximum Depth 410MM, 41.0CM
Net Weight 17.8KG
Shipping weight 20.75KG
Shipping Height 339MM, 33.9CM
Shipping Width 272MM, 27.2CM
Shipping Depth 508MM, 50.8CM
Environmental
Operating Temperature 0 – 40 °C
Operating Relative Humidity 0 – 90 %
Operating Elevation 0 – 3048meters
Storage Temperature -10 – 40 °C
Storage Elevation 0 – 3048meters
Audible noise at 1 meter from
surface of unit 45.0dBA
Conformance
Approvals
CE
Standard warranty
2 years repair or replace
Reviews
There are no reviews yet.