APC Back-UPS 700VA 230V AVR IEC Sockets BX700UI

Key
Features

Run time for load W

1m

Max. Capacity Used

100%

Output power capacity

390Watts / 700VA

Output Connections

(4) IEC 60320 C13 (Battery Backup)

(1) IEC Jumpers (Battery Backup)

Nominal Output Voltage

230V

Nominal Input Voltage

230V

Input Connections

IEC 60320 C14

Cord Length

1.2meters

APC Back-UPS 700VA, 230V, AVR, IEC
Sockets

Battery Backup & Surge Protector
for Electronics and Computers

Includes: User manual

• Automatic Voltage Regulation (AVR)

Automatically
steps up low voltage and steps down high voltage to levels that are suitable
for your equipment.

• Telephone dataline surge protection

Provides
protection of connected equipment from power surges traveling on telephone
lines.

• USB connection

Use your PC
to access additional power protection and management features for your UPS via
a USB Port.

Back-UPS Features
& Benefits

Safety

Safety-agency approved

Ensures the product has been tested
and approved to work safely with the connected service provider equipment and
within the specified environment.

Manageability

LED status display

Quickly understand unit and power
status with visual indicators.

Audible alarms

Provides notification of changing
utility power and UPS power conditions

Availability

Automatic self-test

Periodic battery self-test ensures
early detection of a battery that needs to be replaced.

Battery failure notification

Provides early-warning fault
analysis on batteries enabling timely preventive maintenance

Intelligent battery management

Maximizes battery performance, life,
and reliability through intelligent, precision charging.

Protection

Battery and surge protected outlets

Back up and protect your hardware
and data during power outages, surges and spikes.

Surge only outlets

Protect secondary electronics from
surges and spikes without reducing battery power used to run primary
electronics during an outage.

Marketing
features

Battery-protected and surge-only
outlets

Reserves power capacity and run time
for connected equipment that require UPS battery back-up while providing surge
only protection for less critical equipment

Output

Max Configurable Power (Watts)

390Watts / 700VA

Output Frequency (sync to mains)

50/60 Hz +/- 1 Hz Sync to mains

Topology

Line interactive

Waveform type

Stepped approximation to a sinewave

Transfer Time

4 ms typical

Input

Input frequency

50/60 Hz +/- 3 Hz Auto-sensing

Input voltage range for main
operations

140 – 300V

Number of Power Cords

1

Batteries
& Runtime

Battery type

Lead-acid battery

Typical recharge time

6hour(s)

Replacement Battery

APCRBC110

Expected Battery Life (years)

3 – 5

RBC Quantity

1

Battery Charge Power (Watts)

14Watts

Battery Volt-Amp-Hour Capacity

84

Runtime

View Runtime Graph

View Runtime Chart

Efficiency

View Efficiency Graph

Communications
& Management

Interface Port(s)

USB

Control panel

LED status display with on line : on
battery : replace battery and overload indicators

Audible Alarm

Alarm when on battery : distinctive
low battery alarm : overload continuous tone alarm

Surge
Protection and Filtering

Surge energy rating

273Joules

Data Line Protection

RJ11 modem/fax/DSL protection (two
wire single line)

Physical

Maximum Height

200MM, 20.0CM

Maximum Width

115MM, 11.5CM

Maximum Depth

256MM, 25.6CM

Net Weight

6.0KG

Shipping weight

6.5KG

Shipping Height

275MM, 27.5CM

Shipping Width

295MM, 29.5CM

Shipping Depth

340MM, 34.0CM

SCC Codes

10731304315800

Environmental

Operating Temperature

0 – 40 °C

Operating Relative Humidity

0 – 95 (Non-condensing) %

Operating Elevation

0 – 3048meters

Storage Temperature

-15 – 40 °C

Storage Elevation

0 – 9144meters

Audible noise at 1 meter from
surface of unit

45.0dBA

Conformance

Standard warranty

2 years repair or replace